JBL 352606-002 (Clone)
Manufacturers Info
Brand: JBL (clone)
Model: 352606-002
Style: ---
Coverage (H x V): 75 x 50
Minimum Frequency: ---Hz
Throat: 1.5"
Mounting Type: 4-bolt
Dimensions (W x H x D): 353mm x 230mm x 150mm
Additional Notes:
Clone of the horn JBL used on their SRX715, SRX722 & SRX725 speakers.
Horn was tested without an adaptor as the throat appeared only a hair larger then the other 1.4" horns tested.
Measurements:
Test Notes: Off axis and polars measured using an Eminence N314X
Mic distance 1m, measurements gated at 5ms and are smoothed at 1/48 Octave.
Horizontal:
Vertical:
Raw Horizontal Off Axis Response
Raw Vertical Off Axis Response
Horizontal Off Axis Response - Normalized to On Axis
Vertical Off Axis Response - Normalized to On Axis
Horizontal Polar Response - Normalized to On Axis
-6dB Coverage Angle Highlighted
Vertical Polar Response - Normalized to On Axis
-6dB Coverage Angle Highlighted
Final Notes:
Appears to be constant directivity, I'd put nominal coverage pattern closer to 90 x 60. This seems much wider then the rated 75x50 but since this is a clone the horn profile may not have been an exact match.
Top octave dispersion is determined largely by driver design and throat match-up.