ME90 *Clone*
Manufacturers Info
Brand: (Clone) B&C
Model: ME90
Style: Constant Directivity
Coverage (H x V): 80 x 60*
Minimum Frequency: 900 Hz
Throat: 1.4"
Mounting Type: 4-bolt
Dimensions: 270mm x 270mm x 138mm
Additional Notes:
Chinese Clone of the B&C ME90.
It's a poor clone, in fact the general dimensions and a 1.4" throat are the only real resemblance to the ME90.
This horn is symmetrical even though it lists 80x60 dispersion likely just scraping info from the B&C. The profile and throat are quite different from a real B&C ME90.
Since this horn is symmetrical I only tested it on one axis.
Measurements:
Test Notes: Off axis and polars measured using a LaVoce DF14.30T
Mic distance 1m, measurements gated at 5ms and are smoothed at 1/48 Octave.
Horizontal:
Raw Horizontal Off Axis Response
Horizontal Off Axis Response - Normalized to On Axis
Horizontal Polar Response - Normalized to On Axis
-6dB Coverage Angle Highlighted
Final Notes:
Dispersion more uneven then the real ME90, possibly about 80 degrees nominal. Stronger waistbanding just below 2 kHz then the real ME90, a bit wider in the 3-5kHz range and slightly narrower above that.
Top octave dispersion is determined largely by driver design and throat match-up in the 1.4" realm.