Electro-Voice ELX112 Waveguide (Clone)
Manufacturers Info
Brand: Electro-Voice
Model: ELX112
Style: Constant Directivity
Coverage (H x V): 90 x 50
Minimum Frequency: ---
Throat: 1"
Mounting Type: 2-Bolt
Dimensions (W x H x D): 12" x 8" x 4-1/8"
Additional Notes:
Clone of the waveguide used in the EV ELX112 Speaker
Measurements:
Test Notes: Off axis and polars measured using a Celestion CDX1-1731
Mic distance 1m, measurements gated at 4.5ms and are smoothed at 1/48 Octave.
Horizontal:
Vertical:
Raw Horizontal Off Axis Response
Raw Vertical Off Axis Response
Horizontal Off Axis Response - Normalized to On Axis
Vertical Off Axis Response - Normalized to On Axis
Horizontal Polar Response - Normalized to On Axis
-6dB Coverage Angle Highlighted
Vertical Polar Response - Normalized to On Axis
-6dB Coverage Angle Highlighted
Final Notes:
Horizontal coverage is fairly even around or perhaps a tad wider then the rated width, some narrowing above ~13 kHz. Vertical coverage has a more common tapering pattern but flares out a little in the top octave.